Hi everyone.
First time poster here.
Just wondering if someone can give me some advice on removing some concrete from a brick wall. I'm prepping the area for a concrete path (will be done professionally). After I got two bricks deep below the weep holes, I noticed a fair amount of excess concrete from the slab. It's about 100mm and of varying depth. It covers most of the two walls where the new path slabs will be up against.
Pics:
Back Wall
Side Wall
What's the best way to remove it? Initially I was just going to lightly hammer and chisel, but am worried about cracking the slab. Would a 9" angle grinder with a brick cutting blade be a better option?
Thanks heaps.