Browse Forums Paving & Concreting Re: Cromelin, getnewlook or Miteq concrete sealers 9Sep 25, 2014 3:55 pm Not many if any sealers will last 3 years and all topical sealers on the market should be removed before another application is due . You would not peel over flaky paint would you ? its the same with exterior sealers which is why semi penetrating such as our SmartSeal sealers are so good . The reason we seal every year is mostly due to UV which is very harsh in Australia and worse in New Zealand . We recommend re-sealing decorative jobs every 1-2 years as it is much easier to maintain seal than colour . In the case of Smartseal the procedure for resealing is water blast clean and then apply another coat . We dont really make a wet look sealer as such more so a gloss sealer with 25% solids or 34% any more and the surface becomes slippery which is one disadvantage of most wet look sealers . Feel free to ask me any questions or pull a technical sheet from my website www.getnewlook.com.au Jas Hi all I need a guidance on how far I need to space expansion joints in the concrete driveway and its type (keyway/foam.) Contraction joints are at 3m max for a 125 slab. Thanks 0 11024 I couldn't attached the photo for some reason. Here is the link to the photo https://pin.it/79jwdMp 1 3167 |