Browse Forums Paving & Concreting Re: Coloured sealer gone wrong 4Jan 09, 2014 12:28 pm High pressure scrub isnt going to do anything . Just is poor application im afraid and a common problem . Troy not much you can do without removing the lines and improving on the application . Solvent wont really work you will need to strip off the excess . www.getnewlook.com.au has a product called Easy Strip 2000 and its used to removed coloured sealers from driveways , Anything else just ask Re: Coloured sealer gone wrong 6Jan 10, 2014 11:35 am digga123 Thanks Getjason. I have contacted GetNewLook.com.au and their local representative is kindly sending me some samples of the Easy Strip 1000 and 2000. Thats great Troy , good to see there is some old fashioned customer service still around Regards Unless the room is for storage then it's non compliant BCA V2 2019 S3 P3.8 You have 2 options 1. The builder deconstructs the section and rebuilds as per plan /… 7 10684 2 31344 there is only 20% difference in concrete strength between 20 mpa and 25 mpa, so check with your engineer first if it fits his calculation tolerances. There are ways to… 6 18298 |