Browse Forums Paving & Concreting 1 Aug 13, 2013 12:56 pm Hi All, Really would appreciate your advice on my next project. Have about 26m2 of blown out ag concrete which I would like to crazy pave over. The pavers I am looking at come in various thicknesses ranging from 18mm to 25mm. What would be the best way to lay the pavers on the concrete base and accommodate for the variances in paver thickness? I would ideally like to keep the whole thing under 30mm. What is the recommended brand/method of securing the pavers to the concrete? Also, what grout method would be best? Brands? Much appreciated. I had 28m2 of engineered pavers laid six months back and it was difficult to find someone not taking the pi$$. Internet suggested it should be $85-100/m2 to lay them.… 3 12388 I've filled, levelled and compacted around 100mm of roadbase in preparation to lay some outdoor court tiles. Prior to doing the final compaction, I dusted the top with… 0 3044 I have seen poly marble shower bases last in excess of 30 years 1 4504 |