Browse Forums Paving & Concreting 1 Dec 26, 2012 6:35 pm Hi all, We have just had a brick retainer wall done - 36m long, the highest point is about 1.3m high while the lowest is 800mm high. At the time, the brickie did mention about putting waterproofing into the mortar, but didnt end up doing it (forgot). Anyway, apart from tar, what are some other waterproofing that we could do before putting agi pipe followed by scoria down?? Or what would be the best?? Thanks for your suggestions. Re: Waterproofing brick retainer 2Dec 26, 2012 7:35 pm Sheet of poly as long as you have got good drainage, Which you seem to have from your comments. The Harder You Try - the Luckier You Get ! Web site http://www.anewhouse.com.au Informative, Amusing, and Opinionated Blog - Over 600 posts on all aspects of building a new house. DIY, Home Maintenance & Repair fair question about the slope. Re soil I mean that it doesn't look like reactive clay which swells and shrinks with wetness/dryness. If the floors in your house are… 3 17595 I have researched this topic in detail recently but for another state which has no licensing requirements at all so any handy man can waterproof any old way and not have… 1 8456 2 8621 |