Browse Forums Paving & Concreting 1 May 24, 2011 2:54 pm I will soon be pouring the slab for my garden shed, and am unsure whether I should have any reo in it or not. It's a simple 6" x 5" shed, and I will be mixing the concrete myself - suggestions Re: Reo in shed slab? 2May 24, 2011 5:45 pm Yes you need to put mesh in at least SL52 with at least 100mm of concrete. Here is a useful link for the concreting. http://www.concrete.net.au/publications ... Basics.pdf The Harder You Try - the Luckier You Get ! Web site http://www.anewhouse.com.au Informative, Amusing, and Opinionated Blog - Over 600 posts on all aspects of building a new house. One corner of my shed slab will be directly over a 1400mm diameter concrete soakwell. Is it feasible to fill the soakwell with concrete then lay the shed slab over the… 0 662 Is it possible to render an old corrugated iron shed.I have heard that it can be done if it is covered with chicken wire first.Not sure of the ratio of the render mix and… 0 4896 Thanks. Yeh ideally that would have been good, but have progressed too far now. Hoping some well placed internal walls fixed up into the battens will provide some… 2 5407 |