May 16, 2011 1:21 pm
We have just had our H Class slab poured last Thursday and today when we went to our block we have noticed all these cracks through the slab. My husband and i are worried about this, so thought i would post here first to see if this is normal cracking or something we should be concerned about. Any ideas?
Re: Just Poured H Class Slab Cracks?2
May 24, 2011 7:11 pm
Shrinkage cracks.... its normal, as in slabs are rarely cured properly these days, so most slabs, especially high volume project builds get them to some extent.
Some on the forum here would say be concerned... but if it were my slab i wouldn't be to worried about it.
StructuralBIMGuyslab poured yesterday and framing started next dayslab poured yesterday and framing started next day
mickzoey Not so.. you will need to check your wind loading category and plate-> Frame anchoring system I've seen dynabolts & Hilti explosive anchors cracking slab edges…
StructuralBIMGuyM Class Slab/Foundation on a Site Classified P?? KDR in VICM Class Slab/Foundation on a Site Classified P?? KDR in VIC
Most Stakeholders , Battlers & Punters ask for EXTRA OVER ...COSTS & PROOFS
ew-johnLarge Shed Concrete Slab - Class M Soil, Sand depth, AdviceLarge Shed Concrete Slab - Class M Soil, Sand depth, Advice
Hi all. I am building a large structural steel shed on M class soil with a fair bit of clay. Due to the slope of the ground I have had to cut from some areas and fill in…