Browse Forums Paving & Concreting 1 Jul 15, 2010 4:50 am I have a large amount of exterior paint that I want to use up. Thinking of mixing it with boncrete and use as paving paint. Apparently boncrete is not moisture tolerant and this may be a problem as the area is outdoors under a pergola but does get some rain. Mixing on a ratio of boncrete 1 and paint 3 will this work or is there another sealer I can mix with the paint and use for paving? there is only 20% difference in concrete strength between 20 mpa and 25 mpa, so check with your engineer first if it fits his calculation tolerances. There are ways to… 6 18294 Thankyou so much 😀 I've decided on White on white for doors and trims, White on white 50% on ceiling and Mt buller for walls. Fingers crossed it will look OK 😀 2 7143 Thank you. That is really helpful. Once we get the place done and passed for OC we can upgrade in the future once we get back on our feet and not paying mortgage and rent. 4 5713 |