Browse Forums Paving & Concreting 1 Jun 24, 2010 1:46 pm Started my paving project this week. About 50sqm of it to be done. I have a big pile of crushed rock sitting at the front which needs to be moved to the backyard for the paving base. Tried looking up kennard's but the smallest earthmover they have is the dingo The only access I have is through the internal garage door which is not wide enough for a dingo to fit in. Do I have any other options to move this crushed rock or am I looking at a shovel, wheelbarrow and lots of sweat and blood ? Cheers Avish Re: Moving crushed rock for Paving 4Jun 25, 2010 2:56 pm It can't be more than 5 cu mtrs = 70 barrows(large) or 120 handyman ones. Wear gloves and don't hold on to the end of the handles or you will grind your hands away at the door way Where you are coming from is where you are going to... Re: Moving crushed rock for Paving 6Jun 25, 2010 5:55 pm use a dingo to load wheel barrows Da Vinci Outdoor Living Architectural landscaping http://www.davincioutdoor.com Hi all, I have been looking at land in South Australia, that is on a slope however most of the core excavation is complete, with a flat area to place a house. The agent… 0 1388 Hello everyone, I have a question regarding moving a chandelier after it has been mounted. The chandelier in question is quite large, measuring 4 meters… 0 72331 I had 28m2 of engineered pavers laid six months back and it was difficult to find someone not taking the pi$$. Internet suggested it should be $85-100/m2 to lay them.… 3 12357 |