Jul 11, 2007 12:15 am
I have been having trouble working out how to pave around my existing fibreglass pool.
I have recently removed a sunken exposed ag concrete surround and would like to pave the surround and possibly include a bullnose capping.
Problem: Raised fibreglass coping or rim around the pool..
Can any of you offer advice about;
A) Sticking bullnose pavers to this fibreglass surround (I've heard it can be done)
B) Paving flush to the same height as the fibreglass surround (WITHOUT paving sinking at all later)
C) Any other ideas that work better
I believe that the previous concrete sunk because of the "void" or empty space underneath the raised fibreglass edge which caused the water run off to slosh around underneath and erode the sand away from underneath the concrete. I would HATE for this problem to reoccur after spending the time and money on a nice new paving job
Please any assistance would be greatly appreciated...
I would love to hear any lessons learned from others out there
Re: HELP! Paving around fibreglass pool2
Oct 15, 2007 9:11 am
you need a flexible rubber based tile adhesive for the pool copping
if you have had sinking before look and shaft vibrating the pool beams
but make sure the pool is ful of water when you do this
all of the paving i do for my clients is on a concrete slab around a pool it is advisable to pour a beam of conc after shaft vibration this stops the sinking
if your pool has been in for some time you probably dont need to shaft vibrate just a plate compaction
if you pave on a compacted crushed rock base and sand over time you will have the same problem but this will take from 6 mnths to 2 odd years paving around pools should always be on a conc base
but if your doing it your self sand is the easiest option
Sign in or Join to reply to this Topic
niickshushiPool Builders, in and around The Hills Greater SydneyPool Builders, in and around The Hills Greater Sydney
Thanks again Simeon for being so elaborate. Appreciate it. Its gives us a very idea. Kind Regards
building-expertSolid plastering around door frames - help... so confused :(Solid plastering around door frames - help... so confused :(
If this is a custom build then I would expect the builder to set out the door frame closer to the wall to avoid the gap between architrave and the wall and or specify…
BuildingandLegalPaving Concrete Over Termguard PipesPaving Concrete Over Termguard Pipes
As most others have posted above the install isn't compliant. The pipe is meant to be covered in loose soil or sand, the pipe has holes in it that leaks out a termicide…