Browse Forums Paving & Concreting 1 Dec 10, 2009 1:22 pm G'day people. Has anyone here built bluestone walls , entrances or whatever. I'm building a bluestone entrance. It will be roughly 1.5 high and each pillar will be roughly 500 square. adjoining those will be a slightly curved brick wall each side running to around 2mt out . Any suggestions on footings for the gate pilers , the wall , a good laying mud mix for bluestone blocks , tips . I'm using bigger blocks , assorted 200- 500 size range roughly. The wall bricks are just the second hand reddish bricks , very nice. Also , should I in bed gate mountings into the pillers or use some other method ? The gates aren't a heavy gate , light timbers and 1.5 w x 1.5 h each - 1 of each piller. Cheers Thank you so much. This has been very helpful. We definitely wish to settle and get these people out of our life. They are trying to charge us interest on late… 7 14280 The warning is on the sticker on the door too. Second the aluminium powdercoat 6 18204 I should have followed up on this thread. So, the pier foundation wasn't large enough on the side it was leaning towards, and the NBN cable went through the pier, just… 8 12130 |