Browse Forums Paving & Concreting 1 Jun 13, 2009 10:33 pm Hi there, I am longtime reader and first time poster and have just registered to the Forum. We are currently building in Point Cook (Innisfail) and I would like to ask if anyone has extendered their driveway/cross over? If you have are you required to go through the council? We would like to have the drive way the same width as the double garage and also have the driveway/cross over the same width if possible. Re: Has anyone extende Driveway/Crossover? 2Jun 13, 2009 10:41 pm KGJB Hi there, I am longtime reader and first time poster and have just registered to the Forum. We are currently building in Point Cook (Innisfail) and I would like to ask if anyone has extendered their driveway/cross over? If you have are you required to go through the council? We would like to have the drive way the same width as the double garage and also have the driveway/cross over the same width if possible. Yes, you are required to apply with Wyndham Council, need copy of your concreter's public liability insurance. As for the width , need to check with the council. Do a search on crossover on the Wyndham Council website Cheers Re: Has anyone extende Driveway/Crossover? 3Jun 13, 2009 10:45 pm Thanks for your help hysterical. For anyone else interested in doing the same please look at the attached below. http://www.wyndham.vic.gov.au/freestyle ... DL-web.pdf Re: Has anyone extende Driveway/Crossover? 4Jun 14, 2009 5:19 pm Hi, it depends on each individual council how wide they will allow the crossover and how close it is to nature strip trees, drains etc. We are trying to get approval for a 4-4.5m crossover in Monash council and so far they will not budge from a 3.5m crossover, my brother has a 4.8m one with Glen Eira council. Hi All, we are starting to think of building with Masterpiece Builders in Victoria, has anyone had any feedback or experience with them 0 13593 Hi we are looking to talk to people who have built with them recently. We have signed mid range built contract but identified that a lot of things are not included.… 0 725 To my understanding early saw cuts are to control shrinkage cracks, so doing them now would be pointless. Control joints may reduce ugly cracking during periods of soil… 3 9863 |