Browse Forums Paving & Concreting 1 Aug 01, 2021 7:21 pm Hey all! After some advice about paving I have done. I have bedded the pavers and the joining sand is washing out. I plan on pressure washing the sand and using polymeric sand moving forward. I keep seeing negative reviews that polymeric isn’t as good as it has been made out to be. My next move is to seal the pavers and using polymeric sand instead of using a concrete mixture and sand. Any opinions would be greatly appreciated. Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ I had a similar issue with my fridge not too long ago. It wasn't the same model, but the symptoms were pretty much the same: the compressor would start and then stop… 3 7516 Okay sorry silly me, my wife has solves the mystery for me. It’s because the labels on the ports are all wrongly positioned by the builder hence it confuses me. 2 1373 I'm putting a new floor in my kitchen, slate flagging on a standard concrete slab. I have allowed for a bed thickness of up to 20mm to accommodate the different… 0 17536 |