Aug 04, 2018 6:17 pm
I have 2 basins in 2 bathrooms that I want to replace.
I want to replace the basins from the oval shaped to the rectangular shaped one. But have no luck in removing them from the cabinet top. Builder must have put a lot of glue under the edge.
Before I start smashing things, can someone tell me if they are removable or is it best to just replace basin together with the cabinet top?
How do remove and replace this basin?4
Aug 04, 2018 8:14 pm
If you have a renovator tool, you should be able to get the blade under the edge of the basin and cut through the adhesive. You will probably damage the laminate countertop in the process, most likely burning it because the tool will generate some heat. However, if the rectangle you want to cut out is bigger than the oval that exists, it shouldn’t be a problem. Bonus is you will have two intact oval basins to sell on eBay or Gumtree for a few dollars.
Re: How do remove and replace this basin?7
Aug 05, 2018 1:57 pm
ok. Removed one. Oscillating tool did not work - glue was too deep inside. Ended up breaking the basin with a hammer - this is what I will do in the second bathroom if new basin fits well
Sign in or Join to reply to this Topic
TeoniTap spindle extension for basin sinkTap spindle extension for basin sink
Hello 🤗 I am trying to convert bathroom taps to 1/4 turn taps for my dad's mobility issues and I found the bathroom sink has a deep recess that requires an extender,…
shokel1975Building in Mount View Estate, The Basin VicBuilding in Mount View Estate, The Basin Vic
This is a long shot, but just a call out to anyone building in the Mount View Estate in The Basin.... although it is a small estate, I thought it would be good to share…
salty frogExternal cladding to replace timber - fire safety, insulatioExternal cladding to replace timber - fire safety, insulatio
Thanks Alex, appreciate the reply.