Browse Forums Bathrooms and Laundry 1 May 06, 2018 6:00 am I read the waterproofing standard. Just want clarify that: should we waterproof the entire bathroom floor or only inside the shower cubicle? We are renovating the old house, the bathroom floor is timber not concrete. Thanks for your kind answers. Re: Waterproofing the shower room only or the whole bathroom 4Nov 18, 2018 2:20 pm I always water proof the entire floor of all my bathroom renovations and use buytnol membrane exclusively on all timber floors. Also pays if your having a tiled base to water proof over the screed as well so it remains dry. I water proof the walls and skirting around entire room as well you can never water proof to much. Also make sure that you instal some type of water stop at the shower and the door also to prevent water tracking along the glue lines. Re: Waterproofing the shower room only or the whole bathroom 5Dec 05, 2018 9:59 am Hi Foyou, The entire bathroom floor should be done to be up to Australian Standards... see link below! http://www.build.com.au/bathroom-waterproofing Hope this helps! We are having a bathroom reddone. The builders are putting down two coats of waterproofing and then screed and then another coat of waterproofing. This is what I have been… 0 2355 I have researched this topic in detail recently but for another state which has no licensing requirements at all so any handy man can waterproof any old way and not have… 1 8591 2 8772 |