Browse Forums Bathrooms and Laundry 1 Feb 27, 2018 4:49 pm Hi all! I have a bath swing/screen installed at my place. It was there before I moved and the owner doesn't know the brand anymore. Recently a small plastic part broke (see picture attached) - the part was at the bottom of the rail that's attached to the wall and allows the screen to swing and stay in place. It broke at a screw. Does anyone have any suggestion or idea which brand could this be or where could I buy a spare part? The whole screen is non-functional now but obviously it seems like a waste to replace the entire screen. Thank you in advance! Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ I should have followed up on this thread. So, the pier foundation wasn't large enough on the side it was leaning towards, and the NBN cable went through the pier, just… 8 10747 2 3387 You have no photo with your post. Best I can say is to remove an A&L flyscreen don't be afraid to distort the frame almost like a trapezium. It doesn't take a lot of… 1 4821 |