Gents,
After some advice if i could.
New house, moved in a month ago. Shower pressures (two showers) were both very average when we moved in. No worries i thought ill remove the restrictors from the shower heads. Main bathroom only had one restrictor which was removed.
Ensuite has two heads. Normal hand held one and a 'rainfall' head above you. The hand held head had no restrictor in it but the rain fall one did. Once removed flow was still very average. Pulled it completely apart back to the diverter valve and noticed the holes coming out of the diverter valve are only approx 8mm wide. Not keen on drilling it as i dont want to break it.
Problem still persists.
Tested flow at the kitchen tap with restrictor removed 7.5 L/m
Laundry sink tap with restrictor removed. 13 L/m hot 19 L/m cold.
Both showers with restrictors remoed 7.5 L/m
So im guessing the fault isnt a lack of water pressure as the laundry tap flows at minimum twice that of the showers.
Any where else i could find restrictors? in the mixer on the wall of the shower? Any other ideas?
Thanks
Nathan