Browse Forums Bathrooms and Laundry 1 Mar 05, 2008 11:52 pm Would you use a reglazing/resurfacing company to paint / recolour your tiles and bath, instead of ripping them up and putting in new ones? According the reglazing company's website is it much cheaper to paint the tiles and bath than to have new tiles and bath put in.
We are considering purchasing a house with a very late 70's bathroom (brown tiles and bath). We are happy with the layout of the bathroom. We will be putting in a new vanity and shower screen. Interested to find your opinions (or recommendations) and if it is a genuine alternative to getting brand new tiles and a brand new bath. Re: Bathroom - reglazing / resurfacing - anyone done it? 2Mar 07, 2008 11:12 am I went this path with my pink bathroom. Used a DIY kit from bunnings . quite labour intensive to prepare the surfaces prior to painting. it is an epoxy paint so takes long time to set. and the fumes ![]() ![]() DIY will cost u about $150 materials, sandpaper and all. (tub only) no harm in getting quotes. we had pale grey wall tiles so did nothing for them. good luck. Re: Bathroom - reglazing / resurfacing - anyone done it? 3Mar 07, 2008 11:53 am Hi vpande, Thanks for your reply. What do you mean by 'we had pale grey wall tiles so did nothing for them' - do you mean that you kept the pale grey in their original condition, or do you mean that when you painted the tiles the effect didn't do much ?
Also, I'd like to hear from anyone who has used a tradesperson/company to reglaze / resurface their bathroom. Re: Bathroom - reglazing / resurfacing - anyone done it? 4Mar 07, 2008 2:01 pm Sarahlou, Check the other bathrooms threads - this subject was talked about in depth about 5 or so months ago with some pretty good feedback.
One option I have seen in a mag, was a vinyl floor was laid over the floor tiles to change the colour and texture of a laundry floor. Steve Re: Bathroom - reglazing / resurfacing - anyone done it? 6Mar 07, 2008 4:01 pm Yak_Chat, I found the thread you were talking about. I did search the boards first before posting but must have been searching on the wrong term which is why I didn't see that thread. Thanks! Here is the link for anyone who stumbles on this thread:
https://forum.homeone.com.au/viewtopic.php?t=2364 Re: Bathroom - reglazing / resurfacing - anyone done it? 7Mar 07, 2008 9:07 pm Hi Sarahlou.
We had the bathroom in our old house done in preparation for selling. It cost $2300 (for bath and lots of wall tiling not sure how many m2 exactly). When it was done the bathroom looked fantastic, but we were still in the house for about 4 months after we had it done and by the time we moved out there was already a chip in the bath - thanks to one of our 2yo's toys. I would hate to think what it looks like now! If you can afford to get it done properly, I would say spend the extra and get new bath/tiles. If you don't mind using special cleaners and are very careful (and maybe don't have kids!) then it might be ok for you. Personally I'd only use it again for a quick pre-sale makeover. Hope that helps donuts ![]() Re: Bathroom - reglazing / resurfacing - anyone done it? 9Mar 15, 2008 6:44 pm If you can afford to get it done properly, I would say spend the extra and get new bath/tiles. If you don't mind using special cleaners and are very careful (and maybe don't have kids!) then it might be ok for you. Personally I'd only use it again for a quick pre-sale makeover. Re: Bathroom - reglazing / resurfacing - anyone done it? 10Mar 18, 2008 9:54 pm I once had my bath resurfaced. It was badly damaged when I moved in and looked great when it was finished. I couldn't believe it was the same bath. From memory, it was a few hundred. Assuming the structure of your cabinetry is good then I would DIY everything as follows: - replace your counter tops entirely, - replace all drawer runners with soft close… 1 2252 I work with owner, he/she is my man on the ground and I instruct them when to visit the site and take photos and I have other tools in the bag. 4 2538 ![]() Foid wrap is essential component of energy efficiency and if not installed then alternative solution must be applied subject to building surveyors approval. A good option… 7 3363 ![]() |