Browse Forums Bathrooms and Laundry Re: Floor and wall tile sizes 300 x 300 and 300 x 600 15Jun 18, 2011 10:56 pm netadelle blueblueblue - you would think the tiler would know to line the grout lines up. Don't assume they are that smart! We did 300x300 on the floor and 300x600 on the walls, vertically, assuming that that tiler would match the grout lines up! He didn't!! arrgghh when I complained to the SS he had the owner of the tiling company come out, and although they agreed he could have and should have lined up the grout lines because the job was 'flawless' they wouldn't pull them up and do them again. So make sure you specify that you want the grout lines to match up!! Thanks for the tip. How terrible that they didn't line up the joins for you I have a box of quality drill bits that seem to be new but their engraved sizes covered by rust ,,,,I tried to sand them to see their sizes but still I am finding… 0 1435 Possibly both depending on the sizing. Idea of working from the centre is that you dont have a 20mm thin tile at one end and a 400mm at the other end. A quick search on… 3 8417 I have an investment property and tenants moved out recently. However the Property manager noticed one of the floor tiles is broken and the kitchen Island countertop is… 0 12899 |