Browse Forums Bathrooms and Laundry 1 Nov 10, 2009 7:11 pm Can anyone help me out with the name of, or who makes the systems that you can get and set the temperature and fill height of the bath and it will let you know when its done? So you could be down stairs and set it to a certain temperature and it will beep when its been filled? Thanks in advance Re: Automatically filling bath 2Nov 10, 2009 7:26 pm You can get controllers with Rinnai instantaneous gas hot water systems. They control water temp and litres used. But they need to be installed during your build. Possumchops Now the proud owner of 3.7acres of Serenity. Colour selection completed! Soon to go to council. Re: Automatically filling bath 3Nov 10, 2009 7:32 pm Thank you possum! We saw it in an open house and were interested in it, I thought it was Rheem but I will look for Rinnai. We are just about to build, so not too late! DIY, Home Maintenance & Repair But if it is a ground level open pit, then it is not a charged system. No surprises there. The pipes have obviously been altered and there would be a reason for this.… 3 31265 That was always going to be a challenge and a test of patience. Full marks to your mate. Did you discuss the wet area near the trampoline? 16 17324 Bathroom renovation will likely include a back-to-corner bath and we’re considering a freestanding tap with hand-held shower such as the picture included. My hesitation… 0 24690 |