Browse Forums Bathrooms and Laundry 1 Oct 02, 2009 11:07 pm Hi All, I am looking at getting the Methven Rere Squard Overhead shower. I have never used one of these shower heads before. I was initially thinking of getting the showerhead fitted flush in the ceiling (like you see them in the magazines), however, my ceiling height will be 2.7m. Was just wondering if anyone knows if 2.7 ceiling height is too high, and if it is, then what is the ideal height for this sort of shower head. this is the shower head. http://methven.com/au/product/20762-squ ... ddrencher/ Thanks in advance. Re: Over head drencher Arm length 2Oct 02, 2009 11:41 pm 2.7 may be a little high. When I used to design these into bathrooms I generally put them at about 2.1, 2.2. I think a standard vertical arm comes in 300, 450 or 600mm lengths, so most likely this will dictate the height Built with Bentley homes in Doreen All moved in Dec 2009 Now for the garden! Our stuff so far viewtopic.php?f=31&t=16532 I'll look into different shower heads and ask the plumber about some engineering and see what he says. Thanks 2 9563 If you can calculate the reasonable charged head from let's say 100mm below the gutter to the top of where the vertical riser's horizontal discharge pipe will be, that… 11 17530 Hi everyone, Looking for some advise. We are about to build an above ground pool in our backyard. There is a private sewer line running under the pool at 1.6m… 0 11759 |