Browse Forums Bathrooms and Laundry Re: re-enamel the bathroom? 3Jun 15, 2007 8:08 pm Internal and External Building and Colour Consultant Online - Worldwide http://www.denovoconcepts.com Re: re-enamel the bathroom? 13Aug 16, 2007 6:01 pm I got two three quarter baths re-enamelled at my last place for $1100 - I didn't want to have to pull them out and re tile et cetera. One got a big chip about three months later because the metal soap dispenser came away from the wall (my fault). And then you do need to be extra careful about what chemicals you use on them. But then you have to be careful about the plastic shower bases too. The yellowing mainly occurs to white or very light colours. 1 3011 This link might answer your question. I had the same issue and it turned out to be the roller. https://www.sherwin-williams.com/painti ... %20coating. 4 18268 Hi Geoff Install Puddle Flange prior to any screed. Puddle flange needs to be flush with the surface so you may need to grind away the surface to achieve this. Also as… 2 8557 |