Hi All,
I would like to understand how its possible to install a semi frameless shower screen directly above a water stop as shown in this diagram.
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
I will be installing a fixed screen and a door. The fixed screen does not have a bottom channel as it is semi frameless (the channel is only on the side affixed to the wall). How does this work then? Don't I risk causing the tempered glass to crack if I simply rest it on the water stop?
My water stop protrudes some 8mm. Do I need to cover it with some sort of channel first? What channel would this be?
Thank you
WatchingStarredHistory
MembersPros
Browse Forums Bathrooms and Laundry  30 Jan 2019 17 Junior Member Re: Shower screen on top of water stop 2Jan 29, 2025 5:09 pm I'm facing exactly the conundrum for my hobless shower and frameless shower screen (long story). The NCC (10.2.32) requires the shower screen to incorporate or be mounted on an inverted channel, positioned over the top of the waterstop. AS3740 requires the same, but also allows an option to place the screen inside the waterstop (AS3740:2021 4.15.3). I've yet to see it practically implemented. I'd love to see some images if anyone has done it. And also how to approach covering the waterstop at the shower door threshold. They installed the frameless shower, the bottom of the glass is held between some shiny thing which in turn has been fitted by drilling 2 screws at the floor. I asked the… 0 20310 Hiya, I’ve just had a reno done in my bathroom and the hot water pipe is visible through the tile where moisture evaporates - see the pic as I don’t know how to… 0 28678 I have a toilet that blocks up on the top (2nd) floor of a property. The toilets on the 1st and ground floor are OK) Blockage clears when the using a plunger. But… 0 23911 |
