Browse Forums Bathrooms and Laundry 1 Sep 22, 2021 11:43 pm Hi all I am looking for a solution that involves the shower door handle being able to be magnetised or in some form be able to open, and be held open, by magnets. The hole spacing we need is 145mm, and I have been trying to either locate handles made of nickel that will stick to magnets, or some elegant magnetic product that could attach to the existing handle and connect to a magnet on the wall when opened. Any ideas? Re: Tricky shower door handle question 2Sep 23, 2021 12:30 am Is it standard style frameless 6mm glass? Accessible Carpentry & Cabinets accessiblecarpentry@gmail.com accessiblecarpentry.com.au https://www.facebook.com/pages/Accessible-Carpentry-Cabinets/583314911709039 Re: Tricky shower door handle question 4Sep 23, 2021 9:01 am You could use something like in the link below. It slips over the glass. You could put it away the top and then use a magnetic catch to hold open. https://www.amazon.com/C-R-LAURENCE-GDH ... 52&sr=8-14 Accessible Carpentry & Cabinets accessiblecarpentry@gmail.com accessiblecarpentry.com.au https://www.facebook.com/pages/Accessible-Carpentry-Cabinets/583314911709039 Black on light wood does look good. Not sure if it will be as long lasting as a steel finish? 6 6328 Get some long brass machine screws and bolt right through the gate and put brass acorn nuts and washers on the other side. It will never come off 1 8981 I'll look into different shower heads and ask the plumber about some engineering and see what he says. Thanks 2 9535 |