Browse Forums Bathrooms and Laundry 1 Jul 31, 2021 3:24 pm Hi there, recently purchased a new rinnai infinity natural gas 26 black series unit to swap over with my old rinnai infinity 26 unit as its having issues, anyhow swaped the unit over no problems and tested the kitchen sink which was fine, then the bathroom sink also fine, when tested bath tap and shower the water pressure wasn't as strong and the water never heated up, went out side to check the unit and number 14 was on the display and strong gas small coming out of exhaust, rang rinnai and acouple of plumber mates and all had no idea what was going on, in the meantime I reinstalled the old unit and no issues at all, all taps ran hot water. Swapped over unit incase was issue with unit but once connected this unit same thing happened but this time was still showing 60 on display but only shower and bath water running cold. Anyone know what could be the issue here as very strange? 0 263 Just be careful with building stability during construction, that is when the structure may be weakened, refer to your engineering drawings for stability methodology. 1 6196 Getting the permit for your wall because it's going to be pretty tall in some places isn't too hard, but it does mean you have to do a bit more work. If all these steps… 6 21956 |