Browse Forums Bathrooms and Laundry 1 Aug 26, 2020 7:56 pm Hi guys, So i am uninstalling this door privacy handle for my bathroom and stuck here as the pictures below. I can't seem to take that thing out. I searched on youtube and google for hours and couldn't find one. They all are different kind of door handle or "how to install" only. Please help. Thank you!! Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Re: Help me! 2Aug 26, 2020 9:37 pm The spindle will just slide (or should) out. Some spindles have little tabs on them that stop them sliding right through and with those you need to slide it one way. Most spindles just slide straight through. It may have worn over the years and have got itself stuck a little. If you can see that the spindle hasn't got the little tabs on it just give it a hit on the end and it should push through. It would help if you could get someone to put some pressure on the latch while you do that so it doesn't move in the door and damage it. Hope that makes sense Accessible Carpentry & Cabinets accessiblecarpentry@gmail.com accessiblecarpentry.com.au https://www.facebook.com/pages/Accessible-Carpentry-Cabinets/583314911709039 Hi there, long-time lurker but first time posting. I've bought a house 2 and a bit years ago and last year we had some major water damage on a converted pergola area… 0 7932 Yes, unless you are in a low intensity rainfall area or the area is protected from rain. Do you have access to NCC Part 2 or can you download it? I can email you a copy… 10 12516 Thankyou so much 😀 I've decided on White on white for doors and trims, White on white 50% on ceiling and Mt buller for walls. Fingers crossed it will look OK 😀 2 7165 |