Browse Forums Heating, Cooling & Insulation 1 Oct 06, 2019 2:01 pm So my builder installed 6 ceiling fans in total in my new home. For all of them, the wall control has 1 dot being the strongest and 3 dots being the weakest. I questioned them and they say that's how it's supposed to be because it's more efficient to start the fan at the highest power and that's what people usually do. I can agree with that but shouldn't the dots represent the power? It's so confusing... Re: ceiling fan wall control wired wrong? 3Oct 06, 2019 7:30 pm Althom Ours have numbers 1 to 3. 1 is the fastest, 3 the slowest. Seems to be the standard. Weird, all the places I rented before, 4 in total, were the opposite. Any electricians here please help. 1) Will the Fan need separate switch to ON/OFF/Speed eventhough it comes with Remote 2) how about… 0 1234 To my understanding early saw cuts are to control shrinkage cracks, so doing them now would be pointless. Control joints may reduce ugly cracking during periods of soil… 3 9863 Hi group, have some damage to the door frame and skirting board. It's a side door to the laundry area. Only has a security door. I had a termite inspection (note drill… 0 5059 |