Browse Forums Heating, Cooling & Insulation 1 Oct 06, 2019 2:01 pm So my builder installed 6 ceiling fans in total in my new home. For all of them, the wall control has 1 dot being the strongest and 3 dots being the weakest. I questioned them and they say that's how it's supposed to be because it's more efficient to start the fan at the highest power and that's what people usually do. I can agree with that but shouldn't the dots represent the power? It's so confusing... Re: ceiling fan wall control wired wrong? 3Oct 06, 2019 7:30 pm Althom Ours have numbers 1 to 3. 1 is the fastest, 3 the slowest. Seems to be the standard. Weird, all the places I rented before, 4 in total, were the opposite. Any electricians here please help. 1) Will the Fan need separate switch to ON/OFF/Speed eventhough it comes with Remote 2) how about… 0 1153 Unless the room is for storage then it's non compliant BCA V2 2019 S3 P3.8 You have 2 options 1. The builder deconstructs the section and rebuilds as per plan /… 7 10657 I am saying that double brick has similar thermal performance due to thermal mass effect. It will be still very interesting to see the state of your framing after 10-15… 10 29741 |