Browse Forums Heating, Cooling & Insulation 1 Aug 09, 2019 11:16 am Really keen to put a cover over all the recessed lights to prevent insects, dust and draughts. Also, to allow ceiling insulation to be installed right up to the lights/cover. But Tenmat have told me their covers aren't suitable as the transformer is connected to the light fitting itself. Can anyone help identify the manufacturer of this light, or give a suggestion of how they could be covered? They all have CFL globes. Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Re: Need help identifying recessed light 2Aug 09, 2019 11:23 pm Replace the bulbs with LEDs, which are available from Woolies for very little. Then buy cheap buy reasonable size terracotta garden pots and use those as covers. Just make sure that no insulation is inside the pot. Hi Stuey, think you’ve got a couple of options here you’d just need to decide your preference/which options suits best. You could recess the windows (just keep in… 1 3210 Hi - thanks for your reply. Yes I think 'Ill go for whitish with very speckly bits rather than pure white something like this. PS was actually 2008 I built the… 2 8684 That was always going to be a challenge and a test of patience. Full marks to your mate. Did you discuss the wet area near the trampoline? 16 14130 |