Browse Forums Heating, Cooling & Insulation Re: Install heating/cooling during build or wait and see? 4Jul 18, 2016 6:57 am The Harder You Try - the Luckier You Get ! Web site http://www.anewhouse.com.au Informative, Amusing, and Opinionated Blog - Over 600 posts on all aspects of building a new house. Re: Install heating/cooling during build or wait and see? 7Jul 18, 2016 5:54 pm The Harder You Try - the Luckier You Get ! Web site http://www.anewhouse.com.au Informative, Amusing, and Opinionated Blog - Over 600 posts on all aspects of building a new house. Re: Install heating/cooling during build or wait and see? 11Jul 24, 2016 8:26 am Custom build Northern NSW viewtopic.php?f=31&t=72217 Re: Install heating/cooling during build or wait and see? 19Aug 03, 2016 2:43 pm Lorri Lorri Hi I think that your insulation is pretty low, 1.5 in the ceiling and 2.5 walls is hardly anything. The roof is where you will lose most. Think about putting a lot more up there. Haha, think I must be losing it, not that I ever had "it" had it in the first place. I thought 1.5 was pretty low LoL Haha, if it makes you feel any better I had to go back and double check that I hadn't got it wrong myself Re: Install heating/cooling during build or wait and see? 20Aug 12, 2016 11:55 am IN victoria reverse cycle heating is more expensive than gas, most homes in vic end up with ducted gas heating, i use 6star brivis with heavily insulated ductwork, and unit is 35 mjs, and gas bills are still quite low in winter. 1 13268 Just to makea point about this, an approach that some people have found sucessful in negotiating these rises down, Is to provide some workings to the builder, specifying… 4 81892 That's a fantastic result! Happy you got it sorted out. cheers Simeon 6 8748 |