Browse Forums Heating, Cooling & Insulation Re: wood heaters - inbuilt. for large area 4Jun 01, 2016 8:22 am Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog Re: wood heaters - inbuilt. for large area 6Jun 01, 2016 9:38 am Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog Re: wood heaters - inbuilt. for large area 14Jun 10, 2016 2:58 pm i have basically decided that the bigger the firebox the better. So i am going the Masport i9000 as it seems to have the biggest firebox in the sense that it requires the largest hole in the wall to fit!! it is 760wx696hx565d in mm. it is just 55% efficient but has a high output. Efficiency is a secondary consideration but all wood heaters have a minimum efficiency of 55% anyway. the better ones are around 65%. not a huge difference. so i prefer the ability to heat a big space. Wood supply is not a problem as i have enough of that stuff to last a life time… big block with a lot of trees!! 0 2595 Looking for recommendations for structural engineer that isn't likely to over engineer....as I've read a few posts. 9x7m shed Site class "p" Area is in northern Grampians… 0 6751 Appreciate that Chippy. I won’t do sand under pavers and will connect all up under pavers, however I was going to do: 1) Roadbase compacted with manual hand tamper 2)… 10 21714 |