Browse Forums Heating, Cooling & Insulation 1 Feb 14, 2013 6:57 pm AS3000 was amended in December 2012 and here's a summary of the new requirements for air conditioners and heat pumps: - Air conditioning units and heat pumps are required to be provided with isolation devices mounted adjacent to the appliance (exception – air conditioners supplied from a switchboard dedicated to the control of air conditioners; eg: MSSBs). - For indoor units of air conditioners connected by plug-socket, the isolator must also isolate the socket outlet supplying the indoor unit. And a friendly reminder for all electricians installing air conditioners to provide copies of the required paperwork (Certificate of Compliance/Electrical Safety) to the customer and DNSP. In NSW, failure to provide the required documentation within the required timeframe (14 days of connecting load to supply) can result in fines of up to $1000 per instance if investigated by NSW Fair Trading. http://www.fairtrading.nsw.gov.au/Trade ... ments.html 1. Roof cleaning and paint - which colour do you recommend? I often see black/ dark grey in use these days but I would prefer… 0 8324 Anybody know any good and reasonably priced Air conditioning contractors/companies that could install a ducted air conditioning system in the Central Coast NSW for a small… 0 8994 There may be answers here but can't find anything. I have a closed in veranda, four windows. North facing, just had sunblock blinds installed. A bit cooler (actually… 0 2977 |