Browse Forums Heating, Cooling & Insulation Re: concrete slab floor - layer above plastic barrier? 2Oct 11, 2012 9:27 am Peter Clarkson - AusDesign Australia www.ausdesign.com.au This information is intended to provide general information only. It does not purport to be a comprehensive advice. Re: concrete slab floor - layer above plastic barrier? 11Feb 20, 2013 8:46 pm The plastic is referred to as a vapour barrier, not waterproofing. My structural engineer reminded me of this every time I called the plastic sheet under the slab waterproofing. I Demolition August 2009, Construction Started September 2009, Completed December 2010 Hi, I had a barrier reef pool installed less that 2 years ago and the gel coat is already fading. The colour is electric grey shimmer which isn’t available… 0 3823 I’m not a structural engineer but I’m free. you still need an engineer for the plans. I only have part of your plans, but you seem to have a 850mm drop from the side… 3 9955 DIY, Home Maintenance & Repair Hi, I have an old fence/barrier made of treated pine logs bolted to plates and these are bolted to very large metal posts/girders. The plates and bolts are rusted through… 0 15117 |