Browse Forums Heating, Cooling & Insulation 1 Mar 18, 2011 10:08 pm Hi all, I was hoping someone can point me in the right direction regarding my Brivis buffalo ducted heating not working. The pilot is on and remains on, when I switch the heater on from the wall thermostat nothing happens apart from a gas smell from around the pilot area... Could someone please help Re: Brivis buffalo not working 2Mar 25, 2011 9:56 pm Service call I would say. Sounds like the ignition is not working - play it safe around gas and ignition. You get what you pay for! I had a similar issue with my fridge not too long ago. It wasn't the same model, but the symptoms were pretty much the same: the compressor would start and then stop… 3 7514 Okay sorry silly me, my wife has solves the mystery for me. It’s because the labels on the ports are all wrongly positioned by the builder hence it confuses me. 2 1371 The gap can be adjusted so it's tighter. You can definitely set up corner cabinets to have the same gap as standard doors. 2 13457 |