Browse Forums Heating, Cooling & Insulation Re: R value for timber stud external wall? 4Sep 27, 2010 10:41 am Peter Clarkson - AusDesign Australia www.ausdesign.com.au This information is intended to provide general information only. It does not purport to be a comprehensive advice. Re: R value for timber stud external wall? 7Sep 27, 2010 5:41 pm Built with Sw1tch H0mes >Build thread< House status 15/12: Gates and A/C finally installed! Sep 09 Bought block, Dec 09 Engaged builder, Jul '11 Moved in Re: R value for timber stud external wall? 9Sep 27, 2010 7:52 pm I would be looking to install R2.0 wall batts - esp if you're in the more temperate region of nsw. (sisalation has no bearing on the R value in your type of construction) Peter Clarkson - AusDesign Australia www.ausdesign.com.au This information is intended to provide general information only. It does not purport to be a comprehensive advice. Thanks Pulse, thats really helpful and very much appreciated. Also thanks for the pointer on sheathing, thats me watching too many american youtube videos! 6 2788 As a tradesmen get a private inspector although I don't think there worth it in their profession themselves the reminder they serve to the tradesmen doing the work is… 3 27358 They make the room much easier to clean for one, reflect more light (if light colour tiles are used), and you dont end up with dust on the top edge of tiles (cause most… 3 9591 |