Heating, Cooling & Insulation
May 04, 2009 10:27 am
I have recently purchased the Brivis Evaporative Cooler.
Does anyone now how to restart the wall control/network screen without turning off the unit? I think the screen is freeze for some reason and all I can see is just dot dot on the very top of the screen. I haven't used it for a month due to the cold weather in Melbourne.
Just for a hint, I've made a contact with the service center, and they told me to press Key 1 & Key 3 and hold it for 20 seconds, and etc etc (I don't really remember).
This is the model I have:
Any help will be very much appreciated.
Re: How to restart Brivis Wall Control with FN Key2
May 04, 2009 10:43 am
Is there any messages on the display panel, like error codes or reset????
Re: How to restart Brivis Wall Control with FN Key4
May 04, 2009 10:48 am
And I presume you have tried the turn it off for 2 minutes before turning it back on????
I have the same controller and reading the manual for you at present...
Re: How to restart Brivis Wall Control with FN Key5
May 04, 2009 10:54 am
If you press the "Function" button and key 1 at the same time it should display your error message....
Re: How to restart Brivis Wall Control with FN Key8
May 06, 2009 1:59 pm
Yes just pull the controller off it's backing plate and then put back on after a few seconds it just clip off with a small screwdriver or knife
Thank you Brad for you kind response.
But I am a bit afraid to pull the controller, because don't know how to.
Do you have a screenshot or manual of how to pull it off?
Re: How to restart Brivis Wall Control with FN Key10
May 08, 2009 9:02 am
To reset the controller these are the instructions I have
Take controller off wall (see Brads post they just pop off)
Hold key 1 -3 together (3 seconds)
while still holding 1-3 together attach back to bracket
hold a further 3 seconds
I have done this on my controller and it resets it **** if this is the master controller write down all the settings so you can reprogram
Re: How to restart Brivis Wall Control with FN Key11
Dec 04, 2013 11:36 am
OMG thank you thank you so much....you have just saved me a $275 service call out fee! We moved 6 months ago and I think something must have happened to the controller when the power was cut off prior to our move. Rang Brivis and they wouldnt tell me how to do it and nothing was in the manual. So happy right now!
Re: How to restart Brivis Wall Control with FN Key12
Mar 09, 2014 12:26 pm
Hi Brad, I am having similar issue with my Brivis network controller. I have tried resetting by holding keys 1&3 and plugging the controller back to the wall plate but every time it still comes back with 'Hailing Master Networker' message. Are you able to suggest any thing further? Thanks.
Sign in or Join to reply to this Topic
ZlgBrivis networker won’t switch modesBrivis networker won’t switch modes
Hi, my Brivis networker (heater/ac controller) won’t switch modes to air conditioning like it should. Heater and fan work fine, I’ve also tried resetting the unit but…