Browse Forums Heating, Cooling & Insulation 1 Jun 26, 2021 3:22 pm I'm in the process of roofing ( corrugated iron ) my shed. I want to put the silver sheeted insulation on first but notice there is a lot of different sorts? Which one would suit? I live in Hobart so not terribly hot! I will have a forge, metalwork and a woodwork area. Really I just need a barrier before I put the roofing and siding iron on. Economy is the key word. Is it possible to render an old corrugated iron shed.I have heard that it can be done if it is covered with chicken wire first.Not sure of the ratio of the render mix and… 0 4891 Thanks. Yeh ideally that would have been good, but have progressed too far now. Hoping some well placed internal walls fixed up into the battens will provide some… 2 5393 Hi, I am sheeting the inside of a 5.7 x 8m shed with gyprock. Unfortunately the shed wasn't designed for internal cladding but I have been framing it up as strongly as… 0 3400 |