Heating, Cooling & Insulation
May 04, 2021 9:30 am
We have an Actron Platinum Plus AC installed in our 10-month old house. We have 6 zones. When we use it for heating, heat comes out from all zones even though we only opened 3 zones. Sometimes this can be resolved when turning off and on the AC. I had it looked by Actron before during the first month of moving in. They have changed the zone controllers twice. The last time they have changed it, I was told that during heating the AC tries to blow off cold air from the ducts and this must be the reason why the zones are all open. The problem is in our experience, without us doing anything, the AC never open/close the selected zones even after being turned on for a couple of hours.
Has anyone had the same issue?
Sign in or Join to reply to this Topic
yvonne1Building envelope on two different zones (one without a builBuilding envelope on two different zones (one without a buil
Hi everyone, newly here. We are hoping to build a new house and for that to happen we are in the process of buying a small strip of land (371 square meters) from our…
nfaisalBrick selection, PGH Platinum or Pewter?Brick selection, PGH Platinum or Pewter?
Pewtr is a great choice. Congrats and good luck with the build mate! As for chipping, I suggest you write to them an email when the bricks are about to be laid. Also,…
NonameActron - Static Pressure AdjustmentActron - Static Pressure Adjustment
I was just thinking about having this recorded in your post as teh solution to a problem you posted about. Its searchable so if someone (with the same controller as you)…