After trying many different resources for suggestions and coming up empty handed I thought this might be the right place to try.
My garden is on quite a large incline and required the old crumbling rock walls to be replaced, we chose a builder and a design, we decided against blocked walls in favor of formed concrete as we really did not want any cracking, long story short all was finished and within 6 months all walls have cracked one wall has 4 cracks through both sides, render is falling off, he is not willing to do anything other than now add control cuts in the walls. Total cost was $70k (budget was only $40k) and I don't know where to go from here or what can be done. Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
WatchingStarredHistory
MembersPros
Browse Forums Landscape & Garden Design Thanks for you reply. I have stormwater lines on my property. The wall we are building will be at the fenceline boundary. The ag lines will run on the neighbour (higher… 2 1340 Hi All, If someone could please guide me how should I tackle this.. There is requirement to build a retaining wall around 1 meter high starting from the wall outside of… 0 481 During our build there was an issue with this wall and water. Three years down the track and after the recent rain event in Sydney, this happened within days. My fear is… 0 4411  |
