Browse Forums Landscape & Garden Design 1 Aug 28, 2018 4:54 pm We are currently having some 400x400 concrete pavers laid and after the job is complete I would like to seal them as it is an entertaing area and will probably have some spillage over the next few years. I don't want to alter the look of the paver ( Adbri Euroslate Athens) so I need a penetrating sealer rather than the wet look sealer. I have found this product https://www.bunnings.com.au/crommelin-10l-diamondcoat-natural-paving-and-concrete-sealer_p1560267. Is this the best product to use or can someone recommend another product Any help greatly appreciated Colin Concrete Pavers - Sealing 2Aug 28, 2018 10:24 pm I used this stuff which isn't cheap but was highly recommended to me by a landscaper who uses alot of natural stone. but I have to say it works a treat on sandstone. Bat poo and cockatoo bombs just wash clean, no stain. Pardon the pun. Amber tiles. You can probably find it cheaper elsewhere. Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Hi, planning on using the attached stone pieces in my bathroom. I want to remove stains and gloss seal. Can I get some advice on best way to remove stains and best… 0 6700 Appreciate that Chippy. I won’t do sand under pavers and will connect all up under pavers, however I was going to do: 1) Roadbase compacted with manual hand tamper 2)… 10 18530 |