Aug 28, 2018 5:54 pm
We are currently having some 400x400 concrete pavers laid and after the job is complete I would like to seal them as it is
an entertaing area and will probably have some spillage over the next few years. I don't want to alter the look of the paver ( Adbri Euroslate Athens) so I need a penetrating sealer rather than the wet look sealer.
I have found this product https://www.bunnings.com.au/crommelin-10l-diamondcoat-natural-paving-and-concrete-sealer_p1560267. Is this the best product to use or can someone recommend another product
Any help greatly appreciated
Concrete Pavers - Sealing2
Aug 28, 2018 11:24 pm
I used this stuff which isn't cheap but was highly recommended to me by a landscaper who uses alot of natural stone.
but I have to say it works a treat on sandstone. Bat poo and cockatoo bombs just wash clean, no stain. Pardon the pun.
Amber tiles. You can probably find it cheaper elsewhere.
Sign in or Join to reply to this Topic
buildingnewbie184Shower re-sealing and caulking - Who to use?Shower re-sealing and caulking - Who to use?
I am in the Oakleigh area of Melbourne. Has anyone in this general area used a shower re-sealing + caulking company that they would recommend as doing good work, being…
thepa1nterGap sealing and painting of replaced weatherboardsGap sealing and painting of replaced weatherboards
I understand your concern for the exposed ends especially after having to replace so many boards. If you have touchup paint I would just tidy up the areas that have moved…