Browse Forums Landscape & Garden Design 1 Oct 22, 2014 3:50 pm Our build is nearly complete, and I'm starting to investigate how we are going to do our boundary and pool fence etc. Can anyone advise me on how to do the drawings that are required for my council applications? I need to get "sectional elevations shown the footing details, depth of sheeting, piers, holding down rods" etc???? I have the site plans drawn to scale, obviously, but none of this other stuff. Our next door neighbour is a contractor/handyman, and he is going to assist with building the pool fence and other fences. We are on a corner block, so we need to apply for approval for the fencing along two sides, as well as the pool. (Neighbour is also going to install the colour bond wall between our properties.) I would imagine that fencing companies do these drawings, but because we are planning to do it ourselves, is there some other "cheap" way to go about it? My Building Thread https://forum.homeone.com.au/viewtopic.php?f=31&t=66087 Re: how to get fencing "technical drawings" for council? 2Nov 08, 2014 9:04 am Hi, Just wondering if you have found someone to do your fence elevation drawings? I am a recent graduate of landscape design and may be able to help you out with some affordable plans. Let me know if your interested. Thanks thank you! do we need to get this or our builder before we commence new build on the block? 2 10261 Thanks very much! And would the landscaper/contractor generally involve the engineer or is that something the client would do? Thanks for your help 2 10004 Peter In NSW your Certifier will have a copy, and the Certifier works for you not the builder. They are your representative so just contact them and ask for a… 6 2746 |