Browse Forums Landscape & Garden Design 1 Apr 30, 2014 9:23 pm Gday! We've just had a pool installed and today we had the paving begin to go down. Its all being laid on concrete around the coping beam of the pool with a bit more of additional area as well. After the contractor has glued it down (and left for the day) my husband and I noticed the pavers are somewhat uneven. I watched him lay them today and he kept pulling his level out to make sure the edge along the pool edge was perfectly straight so I can't quite understand how they are uneven (across the top of the pavers). They havent grouted them yet (but they are glued down) so I'm hoping its a case of tomorrow when he returns to grout he will be able to tap them to make it level. Can anyone alay my fears and tell me if the pavers will end up level? We've spent a lot of money on the pool area and we obviously want it right. Thanks in advance. I hope this help you newhome_24, AS3958.1 is the Ceramic Tile Installation Standard. It specifies the tolerances for the installation of tiles. The tile supplier is… 1 5990 I don't think you're getting a response because you are not quite clear on what the issue is. yep, the site is not level, no site is! but are you just building a garage?… 1 1852 I had new concrete laid, extended the alfresco and had the sidewalks concreted too. I noticed the concreter didn't put the expansion foam anywhere, there are expansion… 0 6982 |