Browse Forums Landscape & Garden Design 1 Oct 19, 2012 3:30 pm Hi everyone, Just hoping for some advice on what I would like to do. I would like to setup a very basic reticulation system. Im talking 3, maybe 4 MP rotators and having the hose end with a clip on fitting to attach it to the external tap fitting on the side of the house. Probably a basic timer unit in between just so I can set it for 60 minutes or whatever. I've been looking at Hunters catalogue all day and I'm pretty sure I just need 2x MP3000 and 2x MP2000 along with the 4" PRS popups. Thinking of hooking them up off one main 3/4" hose which will run from the tap to the last sprinkler and using T adaptors to connect them. I would then just clip the hose end onto the tap and turn it on when I want to water and leave it disconnected the rest of the time (with a plug in the end or something to stop dirt entering the line) I haven't worked with reticulation before but I did all my backyard landscaping I am just after some opinions about this possible setup from those who have worked with it before. I plan to do pressure and flow test on the tap first of course, to make sure it can support the sprinklers. Thanks if it's the look that you're not happy with, the easiest option would probably be to spray paint it all into the same color as the walls so it blends in. there might not… 3 4186 that will depend on the kitchen bench depth. you'll have to specify it so it allows for both the tap and the sink 1 7394 7 5139 |