Browse Forums Landscape & Garden Design Re: Help with gate 3Feb 05, 2008 10:53 am Internal and External Building and Colour Consultant Online - Worldwide http://www.denovoconcepts.com Re: Help with gate 12Feb 17, 2008 5:44 am Da Vinci Outdoor Living Architectural landscaping http://www.davincioutdoor.com Re: Help with gate 14Feb 19, 2008 4:42 pm Da Vinci Outdoor Living Architectural landscaping http://www.davincioutdoor.com Re: Help with gate 17May 18, 2008 6:42 pm I've been a big fan of timber gates, and I reckon it kind gives houses abit of character.. colourbond fences are ok.. but just too many houses with the same look..
The missus went too the recycling centre and picked up gates for $15, got metal post for $60.. spent about $50 on pine decking timber.. I had to cut down the gates and reweld the gate frames back together.... a fairly cheap fence.. Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ both sides had post.. one of the concrete in the other side on the house had metal flanges welded on and I dynobolt in 6 spots to the house wall.. it aint going no where Of course the other side is completed now.. boy it makes a difference. Matt I should have followed up on this thread. So, the pier foundation wasn't large enough on the side it was leaning towards, and the NBN cable went through the pier, just… 8 12127 Get some long brass machine screws and bolt right through the gate and put brass acorn nuts and washers on the other side. It will never come off 1 9074 Hi everyone! This is my first time posting here, and I'm looking for some advice regarding my house construction project in North Kellyville. I… 0 6695 |