Browse Forums Landscape & Garden Design 1 May 14, 2010 8:17 pm Hi All, I am looking for some advice relating to a home project. I would like to make some planter boxes that I could locate on our rear deck along the window line. After trawling the net, I found the following link to a storage box referenced on BH&G. http://au.lifestyle.yahoo.com/better-ho ... h-storage/ Does everyone think that this basic exterior ply box design could work as a planter box? Other than not making the top & cutting lots of holes in the base for drainage, would anything else be required? Interested in your thoughts! Cheers Re: Question regarding a planter box design? 2May 14, 2010 8:31 pm I wouldn't use ply wood for that. I would use merbau all round.... For the frame, plywood is fine, pine is fine... If you dont want merbau, any other hardwood would do. you can drill holes for drainage. i would not be signing anything on the day read your contract about when builder submits final invoice generally, have to meet builder within 7 days of receiving final… 1 4724 Hi All, Recently we have signed a contract with Burbank and we are not aware that they have just DORSET, SURREY, HAMPSHIRE, KENT, PILBARA and REDGUM bricks from PGH are… 0 3132 Thank you @. Tried to play with the facade models but the exact colour is not matching up. 2 3230 |