Browse Forums Landscape & Garden Design 1 Oct 06, 2016 8:21 am Hi guys I thinking of choose F20 exposed aggregate mix from outwest for my concrete to pour down I have been shown a few houses he done but they are all very recent jobs and have not fully cured Does anyone have pictured of theirs of the same mix? The attached photos are F20 mix standard but it was only done about a week ago, so I want to compared the difference with a fully cured one Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ there is only 20% difference in concrete strength between 20 mpa and 25 mpa, so check with your engineer first if it fits his calculation tolerances. There are ways to… 6 18298 Last year I had a gas leak at my house. 3 days later, I have about 1 sqm of my exposed aggregate paving broken up. I am not sure how to go about getting it repaired… 0 10410 Regardless of wall hung toilet or floor pan toilet your feet will be right on drain, seems to me the waste should not be in that location given the design. Also are you… 6 7041 |