Browse Forums Landscape & Garden Design Re: Water timer with thermometer 2Mar 02, 2010 6:35 am Could be done, need an electronic temperature switch, a relay and a solenoid. Landscape Design & Construction http://cherub.squarespace.com/ Re: Water timer with thermometer 3Mar 02, 2010 6:46 am Terresa P I am wanting a garden water timer, that will turn on at a certain temperature. Does anyone know if there is any such invention or where I could look for something like this? Thanks in advance, Terresa I have to ask is this so watering can be done in the heat? Where you are coming from is where you are going to... Re: Water timer with thermometer 4Mar 02, 2010 9:54 am onc_artisan Terresa P I am wanting a garden water timer, that will turn on at a certain temperature. Does anyone know if there is any such invention or where I could look for something like this? Thanks in advance, Terresa I have to ask is this so watering can be done in the heat? Misters dont use a lot of water and it will keep the dogs cool outside Re: Water timer with thermometer 5Mar 02, 2010 12:17 pm Have you seen the kits? Still need to hook up for temp. though. http://www.mrmister.com.au/mr%20mister%20pet%20kits.htm Landscape Design & Construction http://cherub.squarespace.com/ Re: Water timer with thermometer 6Mar 02, 2010 12:43 pm cherub Have you seen the kits? Still need to hook up for temp. though. http://www.mrmister.com.au/mr%20mister%20pet%20kits.htm I have already setup the misting system - got everything from Total Eden and it was pretty cheap to setup. That kit does look really good, I havent seen that kit before. I think that kit looks like it is an easy setup and finer mist spray than the one I have. Re: Water timer with thermometer 7Mar 02, 2010 7:52 pm That is going to be tricky. You would use the things cherub suggested. The only thing I can think of is using a weather temp sensor or a suitable thermostat. http://shop.weatherzone.com.au/index.ph ... cts_id=115 You would need to rewire the alarm to trigger the solenoid. http://shop.weatherzone.com.au/index.ph ... ucts_id=76 This certainly doesn't look good. I would be engaging with an independent inspector to have a look at this. As for the unscheduled site visits, most builders are quite… 1 28474 thanks Chippy, i hope they have applied sealer but i am doubt to be honest, so i am gonna do this job after handover. 8 16430 If you can calculate the reasonable charged head from let's say 100mm below the gutter to the top of where the vertical riser's horizontal discharge pipe will be, that… 11 17643 |