Browse Forums Landscape & Garden Design 1 Jan 02, 2010 1:29 pm I am wondering roughly how much per square metre it would cost (labour) to lay a base under my pergola professionally if I supplied the bricks? I have roughly 20 square metres to cover. I am a pensioner hence any sort of DIY is impossible. I am in Adelaide. Thank you..........LL Re: Pergola Base - Adelaide 2Jan 05, 2010 7:39 pm Learner that is a tough question. If you supply bricks and brickies or paving sand base, have a bag of mortar mix on hand, you might find a handy man to do a job like that in a day. They would need the saw or 9" grinder, barrow etc. Labour? well that would need to be negotiated and the price will be indicative of the result Paving, Not just a skill but a bit of an art too Re: Pergola Base - Adelaide 3Jan 05, 2010 8:45 pm I would ring a few suitable trades people from your local paper or classifieds. We did that as we needed a brickie and we supplied all the bricks. Blog: http://bluemistkids.blogspot.com "Never be afraid to try something new. Remember, amateurs built the ark, and professionals built the Titanic." I've filled, levelled and compacted around 100mm of roadbase in preparation to lay some outdoor court tiles. Prior to doing the final compaction, I dusted the top with… 0 3044 I have seen poly marble shower bases last in excess of 30 years 1 4504 Is there a building permit? RU in Victoria? What is the value of the building contract? 1 6821 |