DIY, Home Maintenance & Repair
Jun 12, 2020 9:57 am
Hi there, hubby and I are insulating our garage. It shares a wall with neighbouring garage. Party wall is single stud frame. The neighbours switchboard is on the shared/party wall. When we removed the plasterboard on the party wall we noticed a difference with the section backing the neighbours switchboard. Not sure what it is? It still looks like plasterboard but when we cut it, instead of white plaster dust is was a grey colour.
We have put in our earthwool insulation and are now up to replastering - what plasterboard should we put behind the neighbours switchboard? I’m guessing it was some type of fire check?
Sign in or Join to reply to this Topic
rosewoodVisible Plasterboard Joins after paintVisible Plasterboard Joins after paint
my hallway is exactly the same. my builder got the csr rep out who claimed it was only the lighting problem. I only notice mainly when my front door is open. once I switch…
arcadeltInstalling plasterboard ceiling to colourbond pergolaInstalling plasterboard ceiling to colourbond pergola
You could lift the roof and install batten to the frame, then fix the roof back down to the battens. Roofing material is routinely screwed down, although you'd need to…
gogo65ANYONE KNOW WHAT TYPE OF BRICK THIS IS?ANYONE KNOW WHAT TYPE OF BRICK THIS IS?
They look like they are a mix of recycled browns and reds. We’ve used recycled browns, but we had three options, recycled browns, recycled reds or mixed. They pretty…
mark1881What type of FLOORBOARDS are these?What type of FLOORBOARDS are these?
Hi All, Was hoping someone could identify the type of floorboards in these photos. They're currently under carpet in an old 1960s brick home built in Melbourne. They're…